Hardwood Plywood

Hardwood PlywoodAvailable in: Lauan/Meranti, Hardboard, Virola, Sande, Teco certified Elliottis Pine, American Red Oak, and Birch
Sizes: 70″, 80″, 81″, 90″, 99″, 100″, and 102″, as well as standard lengths of 7-through-10 feet.
Thicknesses: 2.7mm-28mm
Bendable Plywood/ Vertical and CrossGrain (all thicknesses and lengths)
FSC Certified upon request
Carb 2 and ULEF Certified

Plywood is a type of engineered wood made from thin sheets of wood veneer, called plies or veneers. The layers are glued together, each with its grain at right angles to adjacent layers for greater strength.There are usually an odd number of plies, as the symmetry makes the board less prone to warping, and the grain on the outside surfaces runs in the same direction. The plies are bonded under heat and pressure with strong adhesives, usually phenol formaldehyde resin, making plywood a type of composite material. Plywood is sometimes called the original engineered wood.

A common reason for using plywood instead of plain wood is its resistance to cracking, shrinkage, twisting/warping, and its general high degree of strength. It has replaced many dimensional lumbers on construction applications for these reasons.

Plywood

  • Hardwood
  • Plywood
  • Keruing / Kapur Container Flooring
  • Lumber Core-fir Finger Joint
  • Phenolic Film Face Concrete Panels
  • Imported Fancy Plywood
  • Printed Plywood
  • Doorskin Plywood
  • Plywood Products – Exterior, Siding, Industrial, Carved, etc.
  • Bending Luan
Contact us for more info